Knapevogt PB-3126 Side wall bracket User Manual download pdf

SLIDING DOOR HARDWARE:

Side Wall Mount Bracket - PB-3126

Assembly

Instructions

Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips

Drill (13/64") • Perceuse (13/64") • Taladro (13/64")

Tools Required • Outils requis • Herramientas requeridos

CONTENTS QTY

A. Side Wall Bracket Assembly 1

B. #10 x 3/8" Tapping Screw 1

C. White Rubber End Cap 1

D. 3/4" Spacer Washer 1

E. #10 x 1-1/2" Tapping Screw 1

#310377_A (0513)

1. Determine the point on the wall where the end of the track will fall. Find the nearest stud. If greater than 8" from the end of

the track, or if the door weight exceeds 100 lbs., install blocking secured to wall structure to support the end of the track

within 8" of the nearest stud. Layout the stud position on the track and mark each successive stud location.

2. If holes are not present in the track at the locations marked, additional 13/64" holes must be drilled through the top of the

track on center at the stud locations.

3. Thread the supplied #10 x 3/8" screws into the side wall mount brackets through the track holes. Hand tighten only to snug

so that the head of the screw is tight against the track and the bracket above is tight against the track.

4. Place white rubber end caps over protruding screw points.

5. Placing the spacer washer between the side wall bracket and the wall, attach track to wall using #10 x 1-1/2" screws

through the bracket and washer per the above fastening instructions. It is critical that the track be installed level or the door

will not stay in position and roll freely.

Door Weights from 100 to

150 lbs. (2001 Track): If the

door weight is greater than 100

lbs., and not more than 150 lbs.,

secure side wall mount brackets

to wood header and studs on 16"

centers as well as at both ends

of the track.

Door Weights up to 100 lbs.

(1599/1601 Track): If the door

weight is less than 100 lbs.,

secure side wall mount brackets

to wood header and studs on

16" centers with no more than

8" unsupported track at the

track ends.

Minimum Number of Sidewall Bracket Assemblies per Track Length:

4' = 3 • 5' = 4 • 6' = 5 • 8' = 6 • 12' = 10

Wall

Mur

Pared

Wall

Mur

Pared

Spacer Washer

Rondelle d’espacement

Arandela espaciadora

Spacer Washer

Rondelle d’espacement

Arandela espaciadora

Long screw through bracket

and spacer into wall

Longue vis inséré dans le

support, la rondelle et le mur

Tornillo largo a tracés del

soporte y espaciador en la

pared

Long screw through bracket and

spacer into wall

Longue vis inséré dans le support,

la rondelle et le mur

Tornillo largo a tracés del soporte

y espaciador en la pared

1 2

Summary of Contents

Page 1 - SLIDING DOOR HARDWARE:

SLIDING DOOR HARDWARE:Side Wall Mount Bracket - PB-3126Assembly InstructionsPhillips Screw Driver • Tournevis Phillips • Destornillador PhillipsDrill

Page 2 - CONTENIDO QTY

Comments to this Manuals

No comments

Knapevogt PB-3126 Side wall bracket User Manual

Browse online or download User Manual for For Home Knapevogt PB-3126 Side wall bracket. Knape&Vogt PB-3126 Side wall bracket User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For Home Knapevogt PB-3126 Side wall bracket